Heating wire | 1,6 mm.
3000 mm.
2200 mm.
2000 mm.
1350 mm.
These heating wires have a diameter of 1,6 mm. and are cut to the machines length.
The eye on 1 side of the heating wire will hook inside of the expanding pin.
To easily replace the wires they are about 10 cm. longer than the machines working length.
Product information
| Product | |
|---|---|
| Process | |
| Machine type | |
| For machine | |
| Working length | |
| Product | |
| Process | |
| Machine type | |
| For machine | |
| Working length | |
| Product | |
| Process | |
| Machine type | |
| For machine | |
| Working length | |
| Product | |
| Process | |
| Machine type | |
| For machine | |
| Working length |
Heating wire | 1,6 mm.
These heating wires have a diameter of 1,6 mm. and are cut to the machines working length.
There is an eye on 1 side of the heating wire to hook the heating wire inside of the expanding pin.
To easily replace the wires they are about 15 cm. longer than the machines working length.
We advice to tension the wires regularly, which is very easy to do with our machines.
Replacing the brass heating wire connections sets on the heating lines are also recommended.
- 3 years warranty & CE certified
- Pay with Bitcoin and get 10% discount
- Made in Holland
- Free packaging on orders >€1.500,- ordered from Webshop
Suggested accessories for this product
-
Connection set | for 1,6 mm. wire
Connection sets for the 1,6 mm. heating wire, this includes: Brass nipple, rings, spring, brass expanding- and wire-pin, teflon bushings, brass nuts and set screw. Changing this set every few years prevents burning the fuses of the control unit.
Suitable for:- ABM-D
- HR
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Terminal binding posts connectors
These terminal binding posts connectors are available in 4 colors (red, yellow, blue and black). Located at the top and bottom frame and at the back of the temperature control units. Our newest terminals can be used as spare-parts for all bending machines lengths.
Suitable for:- ABM-D
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE
-
Coiled connection wire
The coiled connection wires are used to connect the top and bottom heating lines of our benders. This sets consist out of 2 coiled connection wires with the ring and fork thimbles. It is important to have the heating wire connection sets also in good condition.
Suitable for:- ABM-D
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE
Other suggested products
-
Connection set | for 1,6 mm. wire
Connection sets for the 1,6 mm. heating wire, this includes: Brass nipple, rings, spring, brass expanding- and wire-pin, teflon bushings, brass nuts and set screw. Changing this set every few years prevents burning the fuses of the control unit.
-
Terminal binding posts connectors
These terminal binding posts connectors are available in 4 colors (red, yellow, blue and black). Located at the top and bottom frame and at the back of the temperature control units. Our newest terminals can be used as spare-parts for all bending machines lengths.
-
Top heating profile | Single wire
These single wire top heating profiles can be added to most of our double sided bending machines. With top heating profiles you can heat faster and reduce stress in the plastic sheet. These single wire upper profiles can also be ordered for replacement.
-
Coiled connection wire
The coiled connection wires are used to connect the top and bottom heating lines of our benders. This sets consist out of 2 coiled connection wires with the ring and fork thimbles. It is important to have the heating wire connection sets also in good condition.
-
Heating wire | 0,9 mm.
These heating wires have a diameter of 0,9 mm. and are cut to the machines length. The eye on 1 side of the heating wire will hook inside of the expanding pin. To easily replace the wires they are about 10 cm. longer than the machines working length.
-
Bottom heating profile | Single wire
These single wire heating profiles can be added to most of our plastic bending machines. With multiple single wire heating profiles you can create multiple bends in a single proces. These single wire profiles can also be ordered for replacement.
-
Height adjustment set
The height adjustment sets can be ordered for all bottom heating lines. The sets come complete for both left- and right-hand side of the heating profiles. Includes: teflon blocks, m4 bolts, brass pins, height adjusting wheel and ceramic ball end stops.
