-
Pneumatic Timer (HRK or HRP-S)
Pneumatic timer for the 'old' version of our HRK and HRP-S machines. The timers can be set upto 300 seconds (30 seconds x 10) Our new machines are standard equipped with digital timers that are more accurate.
Suitable for:- HRK
- HRP-S
-
Mobile underframe | bending machines
Mobile under frame with brakes for our table model plastic sheet bending machines. The frame can easily be moved around with the machine on an ideal working height; 96 cm. There is a place to place the pneumatic control box.
Suitable for:- AFF
- AFF-D
- HR
- HRK
- HRT
- X-WIRE
-
Extra or spare Protractor
Aluminium Protractor with engraving of tilting degrees for our cooling fixtures . The VMA fixtures come standard with a single protractor but an additional protractor can be added. The protractor or tilt indicator is also used on our AFF and AFF-D bending machines.
Suitable for:- AFF
- AFF-D
-
Bottom heating profile | Single wire
These single wire heating profiles can be added to most of our plastic bending machines. With multiple single wire heating profiles you can create multiple bends in a single proces. These single wire profiles can also be ordered for replacement.
Suitable for:- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Top heating profile | Single wire
These single wire top heating profiles can be added to most of our double sided bending machines. With top heating profiles you can heat faster and reduce stress in the plastic sheet. These single wire upper profiles can also be ordered for replacement.
Suitable for:- ABM-D
- HRK
- HRP
- HRP-D
- HRP-S
-
Teflon coated heating sword
Teflon coated heating swords for automatic bending machines AFF, AFF-D and FBM. The teflon coated heating swords are available with contact strips of 2 mm. upto 10 mm. width. The swords are available in 500, 650 and 1350 mm. long working length.
Suitable for:- AFF
- AFF-D
- FBM
-
Heating wire | 0,9 mm.
These heating wires have a diameter of 0,9 mm. and are cut to the machines length. The eye on 1 side of the heating wire will hook inside of the expanding pin. To easily replace the wires they are about 10 cm. longer than the machines working length.
Suitable for:- ABM-D
- HR
- HRK
- HRM
- HRT
- X-WIRE
-
Heating wire | 1,6 mm.
These heating wires have a diameter of 1,6 mm. and are cut to the machines length. The eye on 1 side of the heating wire will hook inside of the expanding pin. To easily replace the wires they are about 10 cm. longer than the machines working length.
Suitable for:- ABM-D
- HR
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Glass Fuses (per 10)
Glass fuses for our temperature control and timer units. Available in 2 sizes; 5x20 mm. for our timers and 6,3x32 mm. for the temperature controllers. And in 3 Amperage ratings; 2,5 Amp. 5 Amp. and 10 Amp. Prices are per 10.
Suitable for:- ABM-D
- AFF
- AFF-D
- Flamepolisher
- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE
-
Roll heating wire
These Shannon heating wires are available with a diameter of 0,9 or 1,6 mm. We have rolls of 25, 50, 75, 100 and 200 meter available on stock. The wires can easily be cut to the plastic bending machines working length.
Suitable for:- ABM-D
- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Parallel stops
Parallel stops to extend the machine with more reference bars or as a replacement. Single sided bending machines can use the parallel stops to work from both sides. They are supplied with the needed clamping blocks and handles.
Suitable for:- HRK
- HRP
- HRP-S
- HRT
-
Temperature control units
Single and double units can control the temperature of 1 or 2 heating wires. Our bending machines are internally prepared to easily upgrade with more control units. The digital controllers have a safety that prevent the heating-wire from burning.
Suitable for:- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE