Glass Fuses (per 10)
6,3x32 mm. | 10 TA
6,3x32 mm. | 5,0 TA
6,3x32 mm. | 2,5 TA
5x20 mm. | 5,0 TA
5x20 mm. | 2,5 TA
Glass fuses for our temperature control and timer units.
Available in 2 sizes; 5×20 mm. for our timers and 6,3×32 mm. for the temperature controllers.
And in 3 Amperage ratings; 2,5 Amp. 5 Amp. and 10 Amp. Prices are per 10.
Product information
| Product | Spare-parts |
|---|---|
| Process | Plastic bending, Flame-polishing |
| Machine type | Bending machine, Model 1200 / Model B, Model 500 / A +, Model 800 / A Super |
| For machine | HR, HRT, HRM, HRK, HRP-S, HRP, HRT-D, HRP-D, AFF, AFF-D, ABM-D, X-WIRE, FBM, Flamepolishers |
| Product | Spare-parts |
| Process | Plastic bending, Flame-polishing |
| Machine type | Bending machine, Model 1200 / Model B, Model 500 / A +, Model 800 / A Super |
| For machine | HR, HRT, HRM, HRK, HRP-S, HRP, HRT-D, HRP-D, AFF, AFF-D, ABM-D, X-WIRE, FBM, Flamepolishers |
| Product | Spare-parts |
| Process | Plastic bending, Flame-polishing |
| Machine type | Bending machine, Model 1200 / Model B, Model 500 / A +, Model 800 / A Super |
| For machine | HR, HRT, HRM, HRK, HRP-S, HRP, HRT-D, HRP-D, AFF, AFF-D, ABM-D, X-WIRE, FBM, Flamepolishers |
| Product | Spare-parts |
| Process | Plastic bending, Flame-polishing |
| Machine type | Bending machine, Model 1200 / Model B, Model 500 / A +, Model 800 / A Super |
| For machine | HR, HRT, HRM, HRK, HRP-S, HRP, HRT-D, HRP-D, AFF, AFF-D, ABM-D, X-WIRE, FBM, Flamepolishers |
| Product | Spare-parts |
| Process | Plastic bending, Flame-polishing |
| Machine type | Bending machine, Model 1200 / Model B, Model 500 / A +, Model 800 / A Super |
| For machine | HR, HRT, HRM, HRK, HRP-S, HRP, HRT-D, HRP-D, AFF, AFF-D, ABM-D, X-WIRE, FBM, Flamepolishers |
Glass Fuses (per 10)
We use glass fuses for our temperature control and timer units.
The Glass fuses are available in 2 sizes; 5x20 mm. for our timers and 6,3x32 mm. for the temperature controllers.
We have them in 3 Amperage ratings; 2,5 Amp. 5 Amp. and 10 Amp.
Please select the correct size and amp rating.
Prices are per 10.
- stock product
- CE Certified
- Made in Holland
- Free packaging from €1.500,-
Other suggested products
-
Connection set | for 1,6 mm. wire
Connection sets for the 1,6 mm. heating wire, this includes: Brass nipple, rings, spring, brass expanding- and wire-pin, teflon bushings, brass nuts and set screw. Changing this set every few years prevents burning the fuses of the control unit.
-
Coiled connection wire
The coiled connection wires are used to connect the top and bottom heating lines of our benders. This sets consist out of 2 coiled connection wires with the ring and fork thimbles. It is important to have the heating wire connection sets also in good condition.
-
Roll heating wire
These Shannon heating wires are available with a diameter of 0,9 or 1,6 mm. We have rolls of 25, 50, 75, 100 and 200 meter available on stock. The wires can easily be cut to the plastic bending machines working length.
-
Heating wire | 1,6 mm.
These heating wires have a diameter of 1,6 mm. and are cut to the machines length. The eye on 1 side of the heating wire will hook inside of the expanding pin. To easily replace the wires they are about 10 cm. longer than the machines working length.
-
Terminal binding posts connectors
These terminal binding posts connectors are available in 4 colors (red, yellow, blue and black). Located at the top and bottom frame and at the back of the temperature control units. Our newest terminals can be used as spare-parts for all bending machines lengths.
-
Heating wire | 0,9 mm.
These heating wires have a diameter of 0,9 mm. and are cut to the machines length. The eye on 1 side of the heating wire will hook inside of the expanding pin. To easily replace the wires they are about 10 cm. longer than the machines working length.
-
Bottom heating profile | Single wire
These single wire heating profiles can be added to most of our plastic bending machines. With multiple single wire heating profiles you can create multiple bends in a single proces. These single wire profiles can also be ordered for replacement.
-
Top heating profile | Single wire
These single wire top heating profiles can be added to most of our double sided bending machines. With top heating profiles you can heat faster and reduce stress in the plastic sheet. These single wire upper profiles can also be ordered for replacement.
-
Height adjustment set
The height adjustment sets can be ordered for all bottom heating lines. The sets come complete for both left- and right-hand side of the heating profiles. Includes: teflon blocks, m4 bolts, brass pins, height adjusting wheel and ceramic ball end stops.