Pressure bars
HRK | 650 mm.
HRK | 1250 mm.
HRM | 1300 mm.
HRM | 3000 mm.
HRP-S | 2200 mm.
HRP-S | 3000 mm.
HRP | 2200 mm.
HRP | 3000 mm.
HRP-D | 2000 mm.
AFF | 1350 mm.
AFF-D | 1350 mm.
ABM-D | 1350 mm.
These complete clamping bars can be added to our double sided bending machines.
Holding sheets flat during the heating process will give the best straight bending result.
Complete with aluminium and steel bars and all needed connections.
Product information
| Product | Accessoires, Spare-parts |
|---|---|
| Process | Plastic bending |
| For machine | HRK |
| Working length | 650 mm. |
| Dimensions (LxWxH) | 790x15x180 mm. |
| Product | Accessoires, Spare-parts |
| Process | Plastic bending |
| For machine | HRM, HRK |
| Working length | 1250 mm., 1300 mm. |
| Dimensions (LxWxH) | 1420x15x180 mm. |
| Product | Accessoires, Spare-parts |
| Process | Plastic bending |
| For machine | HRM, HRK |
| Working length | 1250 mm., 1300 mm. |
| Dimensions (LxWxH) | 1420x15x180 mm. |
| Product | Accessoires, Spare-parts |
| Process | Plastic bending |
| For machine | HRM |
| Working length | 3000 mm. |
| Dimensions (LxWxH) | 3270x20x180 mm. |
| Product | Accessoires, Spare-parts |
| Process | Plastic bending |
| For machine | HRP-S, HRP |
| Working length | 2200 mm. |
| Dimensions (LxWxH) | 2480x20x180 mm. |
| Product | Accessoires, Spare-parts |
| Process | Plastic bending |
| For machine | HRP-S, HRP |
| Working length | 3000 mm. |
| Dimensions (LxWxH) | 3270x20x180 mm. |
| Product | Accessoires, Spare-parts |
| Process | Plastic bending |
| For machine | HRP-S, HRP |
| Working length | 2200 mm. |
| Dimensions (LxWxH) | 2480x20x180 mm. |
| Product | Accessoires, Spare-parts |
| Process | Plastic bending |
| For machine | HRP-S, HRP |
| Working length | 3000 mm. |
| Dimensions (LxWxH) | 3270x20x180 mm. |
| Product | Accessoires, Spare-parts |
| Process | Plastic bending |
| For machine | HRP-D |
| Working length | 2000 mm. |
| Dimensions (LxWxH) | 2280x20x180 mm. |
| Product | Accessoires, Spare-parts |
| Process | Plastic bending |
| For machine | AFF |
| Working length | 1350 mm. |
| Dimensions (LxWxH) | 1520x15x180 mm. |
| Product | Accessoires, Spare-parts |
| Process | Plastic bending |
| For machine | AFF-D |
| Working length | 1350 mm. |
| Dimensions (LxWxH) | 1520x15x180 mm. |
| Product | Accessoires, Spare-parts |
| Process | Plastic bending |
| For machine | ABM-D |
| Working length | 1350 mm. |
| Dimensions (LxWxH) | 1520x15x180 mm. |
Pressure bars
Our machines with double side heating have pressure bars to hold down the plastic sheets during the heating process.
These complete clamping bars can be ordered separately as replacement or to extend the machine with.
It is best to hold the material down on both sides of the heating line.
Holding plastic sheets flat during the heating process will prevent warping and give a straight bending result.
Please select the machine type and length or ask us for more advice.
- 3 year warranty
- CE Certified
- Made in Holland
- Free packaging from €1.500,-
Other suggested products
-
Temperature control units
Single and double units can control the temperature of 1 or 2 heating wires. Our bending machines are internally prepared to easily upgrade with more control units. The digital controllers have a safety that prevent the heating-wire from burning.
-
Parallel stops
Parallel stops to extend the machine with more reference bars or as a replacement. Single sided bending machines can use the parallel stops to work from both sides. They are supplied with the needed clamping blocks and handles.
-
Foil Bending Profile | double contact
Teflon coated foil bending profiles with a double contact available from 500 upto 1250 mm length. For bending 2 perfect lines very close in thin plastic sheets. Popular accessory for our Shannon plastic sheet bending machines.
-
Cooling fixture | VMA
Our adjustable cooling fixtures VMA are available in 4 lengths, 65, 125, 220 and 300 cm. The VMA cooling molds are made of high-quality HPL panels. They have a single adjustable bend angle with protractor and 2 parallel stops.
-
Top heating profile | Multiple wire
With multiple wire heating profiles you can create a wider heating zone. This is used for bending a big radius or thicker materials. For bending the maximum thickness materials double side heating is needed with top and bottom heating profiles.
-
Bottom heating profile | Single wire
These single wire heating profiles can be added to most of our plastic bending machines. With multiple single wire heating profiles you can create multiple bends in a single proces. These single wire profiles can also be ordered for replacement.
-
Cooling fixture | VMB
Our adjustable cooling fixture VMB are available in 2 lengths; 125 cm and 220 cm. The fixtures come on mobile underframes and have 2 adjustable bending angles and protractors. The distance between the bends can be set from 100 upto 1000 mm.
-
Working length adjusting set
This working length adjusting set is used to create partially cold or hot zones without covering the heating wire. The temperature can still be adjusted as required. The unique set can be connected to all our heating wire plastic sheet bending machines.
-
Bottom heating line | Multiple wire
With multiple wire heating profiles you can create a wider heating zone. This is used for bending a big radius or thicker materials. For bending the maximum thickness materials double side heating is needed with top and bottom heating profiles.
-
Top heating profile | Single wire
These single wire top heating profiles can be added to most of our double sided bending machines. With top heating profiles you can heat faster and reduce stress in the plastic sheet. These single wire upper profiles can also be ordered for replacement.
-
Foil Bending Profile | single contact
Teflon coated foil bending profiles with a single contact available from 500 upto 1500 mm. length. Ideal for bending very thin plastic sheets and foamed PVC perfectly. Populair accessory for all our plastic sheet bending machines.