-
Foil Bending Profile | single contact
Teflon coated foil bending profiles with a single contact available from 500 upto 1500 mm. length. Ideal for bending very thin plastic sheets and foamed PVC perfectly. Populair accessory for all our plastic sheet bending machines.
Suitable for:- ABM-D
- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Foil Bending Profile | double contact
Teflon coated foil bending profiles with a double contact available from 500 upto 1250 mm length. For bending 2 perfect lines very close in thin plastic sheets. Popular accessory for our Shannon plastic sheet bending machines.
Suitable for:- HR
- HRK
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Working length adjusting set
This working length adjusting set is used to create partially cold or hot zones without covering the heating wire. The temperature can still be adjusted as required. The unique set can be connected to all our heating wire plastic sheet bending machines.
Suitable for:- ABM-D
- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE
-
Bottom heating line | Multiple wire
With multiple wire heating profiles you can create a wider heating zone. This is used for bending a big radius or thicker materials. For bending the maximum thickness materials double side heating is needed with top and bottom heating profiles.
Suitable for:- HRK
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Top heating profile | Multiple wire
With multiple wire heating profiles you can create a wider heating zone. This is used for bending a big radius or thicker materials. For bending the maximum thickness materials double side heating is needed with top and bottom heating profiles.
Suitable for:- HRK
- HRP
- HRP-D
- HRP-S
-
Bottom heating profile | Single wire
These single wire heating profiles can be added to most of our plastic bending machines. With multiple single wire heating profiles you can create multiple bends in a single proces. These single wire profiles can also be ordered for replacement.
Suitable for:- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Top heating profile | Single wire
These single wire top heating profiles can be added to most of our double sided bending machines. With top heating profiles you can heat faster and reduce stress in the plastic sheet. These single wire upper profiles can also be ordered for replacement.
Suitable for:- ABM-D
- HRK
- HRP
- HRP-D
- HRP-S
-
Parallel stops
Parallel stops to extend the machine with more reference bars or as a replacement. Single sided bending machines can use the parallel stops to work from both sides. They are supplied with the needed clamping blocks and handles.
Suitable for:- HRK
- HRP
- HRP-S
- HRT
-
Pneumatic Timer (HRK or HRP-S)
Pneumatic timer for the 'old' version of our HRK and HRP-S machines. The timers can be set upto 300 seconds (30 seconds x 10) Our new machines are standard equipped with digital timers that are more accurate.
Suitable for:- HRK
- HRP-S
-
Temperature control units
Single and double units can control the temperature of 1 or 2 heating wires. Our bending machines are internally prepared to easily upgrade with more control units. The digital controllers have a safety that prevent the heating-wire from burning.
Suitable for:- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE
-
Pressure bars
These complete clamping bars can be added to our double sided bending machines. Holding sheets flat during the heating process will give the best straight bending result. Complete with aluminium and steel bars and all needed connections.
Suitable for:- ABM-D
- AFF
- AFF-D
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
-
Teflon block set
A set of 3 teflon blocks are needed to support foil bending profiles in the 220 and 300 cm long bending machines. The heat resisting teflon blocks can be used with our standard foil bending profile with a single or double contact.
Suitable for:- HR
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
HRP-S
Filters
24 results