Roll heating wire
0,9 mm. | 10 meter
0,9 mm. | 25 meter
0,9 mm. | 50 meter
0,9 mm. | 75 meter
0,9 mm. | 100 meter
0,9 mm. | 200 meter
1,6 mm. | 10 meter
1,6 mm. | 25 meter
1,6 mm. | 50 meter
1,6 mm. | 75 meter
1,6 mm. | 100 meter
1,6 mm. | 200 meter
These Shannon heating wires are available with a diameter of 0,9 or 1,6 mm.
We have rolls of 25, 50, 75, 100 and 200 meter available on stock.
The wires can easily be cut to the plastic bending machines working length.
Product information
Product | Spare-parts |
---|---|
Process | Plastic bending |
Machine type | Bending machine |
For machine | HR, HRT, HRM, HRK, ABM-D, X-WIRE |
Product | Spare-parts |
Process | Plastic bending |
Machine type | Bending machine |
For machine | HR, HRT, HRM, HRK, ABM-D, X-WIRE |
Product | Spare-parts |
Process | Plastic bending |
Machine type | Bending machine |
For machine | HR, HRT, HRM, HRK, ABM-D, X-WIRE |
Product | Spare-parts |
Process | Plastic bending |
Machine type | Bending machine |
For machine | HR, HRT, HRM, HRK, ABM-D, X-WIRE |
Product | Spare-parts |
Process | Plastic bending |
Machine type | Bending machine |
For machine | HR, HRT, HRM, HRK, ABM-D, X-WIRE |
Product | Spare-parts |
Process | Plastic bending |
Machine type | Bending machine |
For machine | HR, HRT, HRM, HRK, ABM-D, X-WIRE |
Product | Spare-parts |
Process | Plastic bending |
Machine type | Bending machine |
For machine | HR, HRT, HRM, HRP-S, HRP, HRT-D, HRP-D, ABM-D |
Product | Spare-parts |
Process | Plastic bending |
Machine type | Bending machine |
For machine | HR, HRT, HRM, HRP-S, HRP, HRT-D, HRP-D, ABM-D |
Product | Spare-parts |
Process | Plastic bending |
Machine type | Bending machine |
For machine | HR, HRT, HRM, HRP-S, HRP, HRT-D, HRP-D, ABM-D |
Product | Spare-parts |
Process | Plastic bending |
Machine type | Bending machine |
For machine | HR, HRT, HRM, HRP-S, HRP, HRT-D, HRP-D, ABM-D |
Product | Spare-parts |
Process | Plastic bending |
Machine type | Bending machine |
For machine | HR, HRT, HRM, HRP-S, HRP, HRT-D, HRP-D, ABM-D |
Product | Spare-parts |
Process | Plastic bending |
Machine type | Bending machine |
For machine | HR, HRT, HRM, HRP-S, HRP, HRT-D, HRP-D, ABM-D |
Roll heating wire
These Shannon heating wires are available with a diameter of 0,9 or 1,6 mm.
We have rolls of 25, 50, 75, 100 and 200 meter in stock.
The wires can easily be cut to the plastic bending machines working length.
We advice to tension the wires regularly, which is very easy to do with our machines.
Replacing the brass heating wire connections sets on the heating lines are also recommended.
- 3 year warranty
- CE Certified
- Made in Holland
- Free packaging from €1.500,-
Other suggested products
-
Coiled connection wire
The coiled connection wires are used to connect the top and bottom heating lines of our benders. This sets consist out of 2 coiled connection wires with the ring and fork thimbles. It is important to have the heating wire connection sets also in good condition.
-
Height adjustment set
The height adjustment sets can be ordered for all bottom heating lines. The sets come complete for both left- and right-hand side of the heating profiles. Includes: teflon blocks, m4 bolts, brass pins, height adjusting wheel and ceramic ball end stops.
-
Heating wire | 0,9 mm.
These heating wires have a diameter of 0,9 mm. and are cut to the machines length. The eye on 1 side of the heating wire will hook inside of the expanding pin. To easily replace the wires they are about 10 cm. longer than the machines working length.
-
Bottom heating profile | Single wire
These single wire heating profiles can be added to most of our plastic bending machines. With multiple single wire heating profiles you can create multiple bends in a single proces. These single wire profiles can also be ordered for replacement.
-
Heating wire | 1,6 mm.
These heating wires have a diameter of 1,6 mm. and are cut to the machines length. The eye on 1 side of the heating wire will hook inside of the expanding pin. To easily replace the wires they are about 10 cm. longer than the machines working length.
-
Connection set | for 1,6 mm. wire
Connection sets for the 1,6 mm. heating wire, this includes: Brass nipple, rings, spring, brass expanding- and wire-pin, teflon bushings, brass nuts and set screw. Changing this set every few years prevents burning the fuses of the control unit.
-
Top heating profile | Single wire
These single wire top heating profiles can be added to most of our double sided bending machines. With top heating profiles you can heat faster and reduce stress in the plastic sheet. These single wire upper profiles can also be ordered for replacement.
-
Terminal binding posts connectors
These terminal binding posts connectors are available in 4 colors (red, yellow, blue and black). Located at the top and bottom frame and at the back of the temperature control units. Our newest terminals can be used as spare-parts for all bending machines lengths.