Set of 5 vacuum suction cups for our AFF en ABM-D machines.
The black rubber vacuum cups come including the screw nipple.
We advice to use our special masking tape to prevent glue damage to the cups.
Product information
| Product | Spare-parts |
|---|---|
| Process | Plastic bending |
| Machine type | Bending machine |
| For machine | ABM-D, AFF, AFF-D |
| Weight | < 1 kg. |
Suction Cups (per 5)
Set of 5 vacuum suction cups for our AFF en ABM-D machines.
The black rubber vacuum cups come including the screw nipple.
We advice to use our special masking tape to prevent glue damage to the cups.
€56,00
- 6 months warranty
- Pay with Bitcoin and get 10% discount
- Made in Europe
- Free packaging on orders >€1.500,- ordered from Webshop
Other suggested products
-
Heating wire | 0,9 mm.
These heating wires have a diameter of 0,9 mm. and are cut to the machines length. The eye on 1 side of the heating wire will hook inside of the expanding pin. To easily replace the wires they are about 10 cm. longer than the machines working length.
-
Connection set | for 1,6 mm. wire
Connection sets for the 1,6 mm. heating wire, this includes: Brass nipple, rings, spring, brass expanding- and wire-pin, teflon bushings, brass nuts and set screw. Changing this set every few years prevents burning the fuses of the control unit.
-
Coiled connection wire
The coiled connection wires are used to connect the top and bottom heating lines of our benders. This sets consist out of 2 coiled connection wires with the ring and fork thimbles. It is important to have the heating wire connection sets also in good condition.
-
Heating wire | 1,6 mm.
These heating wires have a diameter of 1,6 mm. and are cut to the machines length. The eye on 1 side of the heating wire will hook inside of the expanding pin. To easily replace the wires they are about 10 cm. longer than the machines working length.
-
Connection set | for 0,9 mm. wire
Connection sets for the 0,9 mm. heating wire, this includes: Brass nipple, spring, brass expanding- and wire-pin, teflon bushings, brass nuts and set-screw. Changing this set every few years prevents burning the fuses of the control unit.
