-
Heating wire | 0,9 mm.
These heating wires have a diameter of 0,9 mm. and are cut to the machines length. The eye on 1 side of the heating wire will hook inside of the expanding pin. To easily replace the wires they are about 10 cm. longer than the machines working length.
Suitable for:- ABM-D
- HR
- HRK
- HRM
- HRT
- X-WIRE
-
Heating wire | 1,6 mm.
These heating wires have a diameter of 1,6 mm. and are cut to the machines length. The eye on 1 side of the heating wire will hook inside of the expanding pin. To easily replace the wires they are about 10 cm. longer than the machines working length.
Suitable for:- ABM-D
- HR
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Roll heating wire
These Shannon heating wires are available with a diameter of 0,9 or 1,6 mm. We have rolls of 25, 50, 75, 100 and 200 meter available on stock. The wires can easily be cut to the plastic bending machines working length.
Suitable for:- ABM-D
- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Connection set | for 0,9 mm. wire
Connection sets for the 0,9 mm. heating wire, this includes: Brass nipple, spring, brass expanding- and wire-pin, teflon bushings, brass nuts and set-screw. Changing this set every few years prevents burning the fuses of the control unit.
Suitable for:- ABM-D
- HR
- HRK
- HRM
- HRT
- X-WIRE
-
Connection set | for 1,6 mm. wire
Connection sets for the 1,6 mm. heating wire, this includes: Brass nipple, rings, spring, brass expanding- and wire-pin, teflon bushings, brass nuts and set screw. Changing this set every few years prevents burning the fuses of the control unit.
Suitable for:- ABM-D
- HR
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Coiled connection wire
The coiled connection wires are used to connect the top and bottom heating lines of our benders. This sets consist out of 2 coiled connection wires with the ring and fork thimbles. It is important to have the heating wire connection sets also in good condition.
Suitable for:- ABM-D
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE
-
Terminal binding posts connectors
These terminal binding posts connectors are available in 4 colors (red, yellow, blue and black). Located at the top and bottom frame and at the back of the temperature control units. Our newest terminals can be used as spare-parts for all bending machines lengths.
Suitable for:- ABM-D
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE
-
Height adjustment set
The height adjustment sets can be ordered for all bottom heating lines. The sets come complete for both left- and right-hand side of the heating profiles. Includes: teflon blocks, m4 bolts, brass pins, height adjusting wheel and ceramic ball end stops.
Suitable for:- ABM-D
- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Glass Fuses (per 10)
Glass fuses for our temperature control and timer units. Available in 2 sizes; 5x20 mm. for our timers and 6,3x32 mm. for the temperature controllers. And in 3 Amperage ratings; 2,5 Amp. 5 Amp. and 10 Amp. Prices are per 10.
Suitable for:- ABM-D
- AFF
- AFF-D
- Flamepolisher
- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE
-
Magnetic timer
Magnetic timer with digital display and alarm easy to stick to your machine. Ideal for setting heating times for machines without a time controlled top frame. Alarm functions as timer and stopwatch for your repeating bending cycle.
Suitable for:- HR
- HRM
- HRT
- HRT-D
- X-WIRE
-
Weight blocks
They are used for holding plastic sheets flat during heating proces or holding sheets in place during the cooling proces. The heavy metal blocks are painted with a high quality powder-coating. We offer different sizes of weight block sets.
Suitable for:- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE
-
Mobile underframe | bending machines
Mobile under frame with brakes for our table model plastic sheet bending machines. The frame can easily be moved around with the machine on an ideal working height; 96 cm. There is a place to place the pneumatic control box.
Suitable for:- AFF
- AFF-D
- HR
- HRK
- HRT
- X-WIRE
Accessories & Spare-parts
You can order accessories and spare-parts for our plastic sheet bending and polishing machines form our website.
All acrylic bending or polishing accessories can also be added in a quote request with our machines.
Please contact us so we can direct you to a local distributor for the fastest service and the best price.
Not sure what accessory or spare-part you need? We can advice you!
Filters
56 results
