-
Handycut ceramic cutter
Our Handycut series ceramic cutters for removing sharp edges of plastic sheets. V-shape with double sided cutting, L- and C-shape for straight and round single side cutting. The ceramic deburring blades can easily be replaced.
Suitable for:- AM2-I
- AMI-C
- AMT
- BOX
- EBM
- EF-200
- Flamepolisher
- PRISMA
- SH-450
-
Replacement ceramic blades
Our spare replacement ceramic blades for our Handycut cutters. We offer the 'V-shape' with double sided cutting, 'L-shape' for straight and 'C-shape' round single side cutting. The ceramic deburring blades can easily be replaced.
Suitable for:- AM2-I
- AMI-C
- AMT
- BOX
- EBM
- EF-200
- Flamepolisher
- PRISMA
- SH-450
-
Temperature control units | AFF
You can easily exchange an AFF temperature control unit when it need to be replaced. Temperature control units for the AFF and AFF-D are available. The controllers have a digital display and can show the temperature in Celsius or Fahrenheit.
Suitable for:- AFF
- AFF-D
-
Connection set | for 0,9 mm. wire
Connection sets for the 0,9 mm. heating wire, this includes: Brass nipple, spring, brass expanding- and wire-pin, teflon bushings, brass nuts and set-screw. Changing this set every few years prevents burning the fuses of the control unit.
Suitable for:- ABM-D
- HR
- HRK
- HRM
- HRT
- X-WIRE
-
Connection set | for 1,6 mm. wire
Connection sets for the 1,6 mm. heating wire, this includes: Brass nipple, rings, spring, brass expanding- and wire-pin, teflon bushings, brass nuts and set screw. Changing this set every few years prevents burning the fuses of the control unit.
Suitable for:- ABM-D
- HR
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Height adjustment set
The height adjustment sets can be ordered for all bottom heating lines. The sets come complete for both left- and right-hand side of the heating profiles. Includes: teflon blocks, m4 bolts, brass pins, height adjusting wheel and ceramic ball end stops.
Suitable for:- ABM-D
- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Coiled connection wire
The coiled connection wires are used to connect the top and bottom heating lines of our benders. This sets consist out of 2 coiled connection wires with the ring and fork thimbles. It is important to have the heating wire connection sets also in good condition.
Suitable for:- ABM-D
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE
-
Terminal binding posts connectors
These terminal binding posts connectors are available in 4 colors (red, yellow, blue and black). Located at the top and bottom frame and at the back of the temperature control units. Our newest terminals can be used as spare-parts for all bending machines lengths.
Suitable for:- ABM-D
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE
-
Pressure bars
These complete clamping bars can be added to our double sided bending machines. Holding sheets flat during the heating process will give the best straight bending result. Complete with aluminium and steel bars and all needed connections.
Suitable for:- ABM-D
- AFF
- AFF-D
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
-
Pressure roller-track
These pressure roller tracks can be used in our HRT-D and HRP-D bending machines. The roller tracks will hold the moving acrylic sheets flat during the heating process without scratching. The supplied roller tracks can be adjusted in height.
Suitable for:- HRP-D
- HRT-D
-
Teflon block set
A set of 3 teflon blocks are needed to support foil bending profiles in the 220 and 300 cm long bending machines. The heat resisting teflon blocks can be used with our standard foil bending profile with a single or double contact.
Suitable for:- HR
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Dust extractor
Professional dust extractor to vacuum and collect the polishing chips from our smaller diamond polishers. Comes standard with adapter to fit our machines perfectly. Can collect small dust, chips and ashes upto 20 Liters.
Suitable for:- AMT
- BOX
- EF-200
- PRISMA