-
Temperature control units | AFF
You can easily exchange an AFF temperature control unit when it need to be replaced. Temperature control units for the AFF and AFF-D are available. The controllers have a digital display and can show the temperature in Celsius or Fahrenheit.
Suitable for:- AFF
- AFF-D
-
Connection set | for 0,9 mm. wire
Connection sets for the 0,9 mm. heating wire, this includes: Brass nipple, spring, brass expanding- and wire-pin, teflon bushings, brass nuts and set-screw. Changing this set every few years prevents burning the fuses of the control unit.
Suitable for:- ABM-D
- HR
- HRK
- HRM
- HRT
- X-WIRE
-
Connection set | for 1,6 mm. wire
Connection sets for the 1,6 mm. heating wire, this includes: Brass nipple, rings, spring, brass expanding- and wire-pin, teflon bushings, brass nuts and set screw. Changing this set every few years prevents burning the fuses of the control unit.
Suitable for:- ABM-D
- HR
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Height adjustment set
The height adjustment sets can be ordered for all bottom heating lines. The sets come complete for both left- and right-hand side of the heating profiles. Includes: teflon blocks, m4 bolts, brass pins, height adjusting wheel and ceramic ball end stops.
Suitable for:- ABM-D
- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Coiled connection wire
The coiled connection wires are used to connect the top and bottom heating lines of our benders. This sets consist out of 2 coiled connection wires with the ring and fork thimbles. It is important to have the heating wire connection sets also in good condition.
Suitable for:- ABM-D
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE
-
Terminal binding posts connectors
These terminal binding posts connectors are available in 4 colors (red, yellow, blue and black). Located at the top and bottom frame and at the back of the temperature control units. Our newest terminals can be used as spare-parts for all bending machines lengths.
Suitable for:- ABM-D
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE
-
Pressure bars
These complete clamping bars can be added to our double sided bending machines. Holding sheets flat during the heating process will give the best straight bending result. Complete with aluminium and steel bars and all needed connections.
Suitable for:- ABM-D
- AFF
- AFF-D
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
-
Pressure roller-track
These pressure roller tracks can be used in our HRT-D and HRP-D bending machines. The roller tracks will hold the moving acrylic sheets flat during the heating process without scratching. The supplied roller tracks can be adjusted in height.
Suitable for:- HRP-D
- HRT-D
-
Flamepolisher Service
We completely service your flamepolisher. We replace all gaskets, rubber rings and tubing on the in- and outside of the machine. We fill the cells with new caustic solution and distilled water. A service like this is required every 3 years!
Suitable for:- Flamepolisher
-
Flamepolisher Service Kit
This service kit includes the needed caustic tableta, all gaskets and rubber rings. Also the gas booster tubing and black and clear tubing for the in- and outside of the machine. A service for these machines is required every 3 years.
Suitable for:- Flamepolisher
-
Torch Handle
Spare Torch Handle pistol for our flame polishers with a 45 degree neck. Our torch tips can be connected to the handle with a simple twist. The torch handle pistol comes without torch tips that determine the flame size.
Suitable for:- Flamepolisher
-
Pressure switch
Replacement pressure switch for all our flame polishing machines. The pressure switch switches the transformer of the flamepolisher on when pressure drops. Replacement of this switch always needs to be done by a professional electrician.
Suitable for:- Flamepolisher