-
Weight blocks
They are used for holding plastic sheets flat during heating proces or holding sheets in place during the cooling proces. The heavy metal blocks are painted with a high quality powder-coating. We offer different sizes of weight block sets.
Suitable for:- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE
-
Cooling fixture | VMA
Our adjustable cooling fixtures VMA are available in 4 lengths, 65, 125, 220 and 300 cm. The VMA cooling molds are made of high-quality HPL panels. They have a single adjustable bend angle with protractor and 2 parallel stops.
Suitable for:- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE
-
Cooling fixture | VMB
Our adjustable cooling fixture VMB are available in 2 lengths; 125 cm and 220 cm. The fixtures come on mobile underframes and have 2 adjustable bending angles and protractors. The distance between the bends can be set from 100 upto 1000 mm.
Suitable for:- HRK
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE
-
Cooling fixture | VMD
The cooling fixture VMD is a 3 meter long fixture to go perfect with our HRT-D and HRP-D conveyor belt bending machines. The cooling fixture is easily convertible for cooling sheets in the most common display shapes, like T-, L-, U-Displays.
Suitable for:- HRK
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Mobile underframe | Fixtures VMA
Mobile underframes with brakes for all our VMA model cooling fixtures. The frame can easily be moved around with the fixture on an ideal working height of 96 cm. The welded frames are very compact and have strips to lock the fixture on the frame.
Suitable for:- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE
-
Foil Bending Profile | single contact
Teflon coated foil bending profiles with a single contact available from 500 upto 1500 mm. length. Ideal for bending very thin plastic sheets and foamed PVC perfectly. Populair accessory for all our plastic sheet bending machines.
Suitable for:- ABM-D
- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Foil Bending Profile | double contact
Teflon coated foil bending profiles with a double contact available from 500 upto 1250 mm length. For bending 2 perfect lines very close in thin plastic sheets. Popular accessory for our Shannon plastic sheet bending machines.
Suitable for:- HR
- HRK
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Working length adjusting set
This working length adjusting set is used to create partially cold or hot zones without covering the heating wire. The temperature can still be adjusted as required. The unique set can be connected to all our heating wire plastic sheet bending machines.
Suitable for:- ABM-D
- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE
-
Bottom heating line | Multiple wire
With multiple wire heating profiles you can create a wider heating zone. This is used for bending a big radius or thicker materials. For bending the maximum thickness materials double side heating is needed with top and bottom heating profiles.
Suitable for:- HRK
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Top heating profile | Multiple wire
With multiple wire heating profiles you can create a wider heating zone. This is used for bending a big radius or thicker materials. For bending the maximum thickness materials double side heating is needed with top and bottom heating profiles.
Suitable for:- HRK
- HRP
- HRP-D
- HRP-S
-
Bottom heating profile | Single wire
These single wire heating profiles can be added to most of our plastic bending machines. With multiple single wire heating profiles you can create multiple bends in a single proces. These single wire profiles can also be ordered for replacement.
Suitable for:- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Top heating profile | Single wire
These single wire top heating profiles can be added to most of our double sided bending machines. With top heating profiles you can heat faster and reduce stress in the plastic sheet. These single wire upper profiles can also be ordered for replacement.
Suitable for:- ABM-D
- HRK
- HRP
- HRP-D
- HRP-S
HRP
16 results
