HRK 65 bending machine set (2021)
HRK 65 | 1 heating line bottom and 1 top
HRK 65 | 2 heating lines bottom and 2 top
Very productive modular constructed plastic bending machines with double side heating and electronic timer.
Comes with under frame, fixture VMA 65 and Fixture frame on wheels.
Can be constructed with 2 heating lines top and 2 heating lines bottom.
Product information
Type | HRK 65 |
---|---|
Model type | Table model |
Bending method | Manual |
Bending lines | Multiple lines |
Heating method | Double sided |
Under heating | 1 |
Upper heating | 1 |
Modular extendable | Yes |
Distance between 2 bends | 15 - 445 mm. |
Number of clamps | 1 |
Construction | 1 heating line bottom and 1 top |
Working length | 650 mm. |
Working thickness | 1,0 - 6,0 mm. |
Maximum thickness | 12 mm. |
Connection voltage | 230 Volt |
Electrical usage | 300 Watt. |
Dimensions (LxWxH) | 835x580x660 mm. |
Weight | 70 kg. |
Type | HRK 65 |
Model type | Table model |
Bending method | Manual |
Bending lines | Multiple lines |
Heating method | Double sided |
Under heating | 2 |
Upper heating | 2 |
Modular extendable | Yes |
Distance between 2 bends | 15 - 445 mm. |
Number of clamps | 2 |
Construction | 2 heating lines bottom and 2 top |
Working length | 650 mm. |
Working thickness | 1,0 - 6,0 mm. |
Maximum thickness | 12 mm. |
Connection voltage | 230 Volt |
Electrical usage | 600 Watt. |
Dimensions (LxWxH) | 835x580x660 mm. |
Weight | 70 kg. |
HRK 65 bending machine set (2021)
This Shannon HRK 65 machine from 2021 is a highly productive plastic sheet bending machines with both bottom and top heating. The heating profiles can be adjusted to the correct position and the heating wires are adjustable in height.
The two-sided heating of the HRK series enables the processing of the plastic sheets faster, but above all, it reduces the stress in the material and can handle thicker materials and polycarbonate.
The pneumatic upper frame has adjustable pressure bars that hold the plates in place and prevent warping (banana effect). The upper frame is controlled by a foot pedal, timer switch and emergency stop.
The durable heat resistant worktop consists of multiple adjustable panels and has a parallel stop with millimetre and inch indication.
The machine is modular built and is already prepared internally so that it can be easily extended with multiple heating profiles and/or control units.
- 1 year warranty
- CE Certified
- Made in Holland
- Free packaging from €1.500,-
- Manual bending machine
Suggested accessories for this product
-
Cooling fixture | VMB
Our adjustable cooling fixture VMB are available in 2 lengths; 125 cm and 220 cm. The fixtures come on mobile underframes and have 2 adjustable bending angles and protractors. The distance between the bends can be set from 100 upto 1000 mm.
Suitable for:- HRK
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE
-
Mobile underframe | bending machines
Mobile under frame with brakes for our table model plastic sheet bending machines. The frame can easily be moved around with the machine on an ideal working height; 96 cm. There is a place to place the pneumatic control box.
Suitable for:- AFF
- AFF-D
- HR
- HRK
- HRT
- X-WIRE
-
Top heating profile | Multiple wire
With multiple wire heating profiles you can create a wider heating zone. This is used for bending a big radius or thicker materials. For bending the maximum thickness materials double side heating is needed with top and bottom heating profiles.
Suitable for:- HRK
- HRP
- HRP-D
- HRP-S
-
Foil Bending Profile | single contact
Teflon coated foil bending profiles with a single contact available from 500 upto 1500 mm. length. Ideal for bending very thin plastic sheets and foamed PVC perfectly. Populair accessory for all our plastic sheet bending machines.
Suitable for:- ABM-D
- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Working length adjusting set
This working length adjusting set is used to create partially cold or hot zones without covering the heating wire. The temperature can still be adjusted as required. The unique set can be connected to all our heating wire plastic sheet bending machines.
Suitable for:- ABM-D
- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE
-
Bottom heating line | Multiple wire
With multiple wire heating profiles you can create a wider heating zone. This is used for bending a big radius or thicker materials. For bending the maximum thickness materials double side heating is needed with top and bottom heating profiles.
Suitable for:- HRK
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
Other suggested products
-
HRT-D
Very productive plastic sheet bending machine of 3000 mm. working length. Comes with auto-feeding and conveyor belt. Equipped with or modular extendable upto 4 temperature controllers for 4 heating lines and 4 clamping roller-tracks.
Machine type:- Automatic bending machine
-
HRM
Plastic sheet bending machine with double side heating of 1.300 mm or 3.000 mm working length. Can be used for bending materials from 1 upto 10 mm thickness. Ideal for working on location and making PC and PVC Wall protection covers and stair nosing.
Machine type:- Manual bending machine
-
HRP
Heavy constructed plastic bending machines with double side heating for bending upto 25 mm sheets. This plastic bender is available in 2200 and 3000 mm working length. Can be upgraded upto 4 over 4 heating lines and 8 heating lines can be used simultaneously.
Machine type:- Manual bending machine
-
HRP-S
Heavy constructed plastic bending machines with double side heating for all kinds of thermoplastics. Available in 2200 and 3000 mm. working length. Has upto 2 heating lines top and 4 bottom and 4 heating lines can be used simultaneously.
Machine type:- Manual bending machine