HRM
HRM 130 | with lightweight re-usable packaging
HRM 130 | No packaging
HRM 300 | with lightweight re-usable packaging
HRM 300 | No packaging
Plastic sheet bending machine with double side heating of 1.300 mm or 3.000 mm working length.
Can be used for bending materials from 1 upto 10 mm thickness.
Ideal for working on location and making PC and PVC Wall protection covers and stair nosing.
Product information
| Type | HRM 130 |
|---|---|
| Model type | Table model |
| Bending method | Manual |
| Bending lines | Single |
| Heating method | Double sided |
| Under heating | 1 line |
| Upper heating | 1 line |
| Modular extendable | No |
| Number of clamps | 1 bar |
| Construction | with lightweight re-usable packaging |
| Working length | 1300 mm. |
| Working thickness | 0,5 - 10 mm. |
| Connection voltage | 230 Volts |
| Electrical usage | 1 kW. |
| Dimensions (LxWxH) | 1700x560x400 mm. |
| Weight | 50 kg. |
| Type | HRM 130 |
| Model type | Table model |
| Bending method | Manual |
| Bending lines | Single |
| Heating method | Double sided |
| Under heating | 1 line |
| Upper heating | 1 line |
| Modular extendable | No |
| Number of clamps | 1 bar |
| Construction | No packaging |
| Working length | 1300 mm. |
| Working thickness | 0,5 - 10 mm. |
| Connection voltage | 230 Volts |
| Electrical usage | 1 kW. |
| Dimensions (LxWxH) | 1600x460x300 mm. |
| Weight | 45 kg. |
| Type | HRM 300 |
| Model type | Table model |
| Bending method | Manual |
| Bending lines | Single |
| Heating method | Double sided |
| Under heating | 1 line |
| Upper heating | 1 line |
| Modular extendable | No |
| Number of clamps | 1 bar |
| Construction | with lightweight re-usable packaging |
| Working length | 3000 mm. |
| Working thickness | 0,5 - 10 mm. |
| Connection voltage | 230 Volts |
| Electrical usage | 1 kW. |
| Dimensions (LxWxH) | 3585 x 665 x 400 mm. |
| Weight | 75 kg. |
| Type | HRM 300 |
| Model type | Table model |
| Bending method | Manual |
| Bending lines | Single |
| Heating method | Double sided |
| Under heating | 1 line |
| Upper heating | 1 line |
| Modular extendable | No |
| Number of clamps | 1 bar |
| Construction | No packaging |
| Working length | 3000 mm. |
| Working thickness | 0,5 - 10 mm. |
| Connection voltage | 230 Volts |
| Electrical usage | 1 kW. |
| Dimensions (LxWxH) | 3485 x 565 x 300 mm. |
| Weight | 65 kg. |
HRM
The HRM plastic sheet bending machines are ideal for a single bend in plastics (PVC, PET, PMMA, PS, PC etc.) up to 10 mm due to the double-sided heating.
The machines can be easily carried on-site. Perfect for use with PVC or PC wall coverings and stair nosing.
The option of contact heating profiles in the upper heating profile makes a very straight and accurate bending in thinner materials from 0.5 to 2 mm possible.
The HRM 300 version comes with a standard built in angle setting to allow large sheet to cool quickly at the desired angle.
- 3 year warranty
- CE Certified
- Made in Holland
- Free packaging from €1.500,-
- Manual bending machine
Suggested accessories for this product
-
Cooling fixture | VMB
Our adjustable cooling fixture VMB are available in 2 lengths; 125 cm and 220 cm. The fixtures come on mobile underframes and have 2 adjustable bending angles and protractors. The distance between the bends can be set from 100 upto 1000 mm.
Suitable for:- HRK
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE
-
Bottom heating profile | Single wire
These single wire heating profiles can be added to most of our plastic bending machines. With multiple single wire heating profiles you can create multiple bends in a single proces. These single wire profiles can also be ordered for replacement.
Suitable for:- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Top heating profile | Single wire
These single wire top heating profiles can be added to most of our double sided bending machines. With top heating profiles you can heat faster and reduce stress in the plastic sheet. These single wire upper profiles can also be ordered for replacement.
Suitable for:- ABM-D
- HRK
- HRP
- HRP-D
- HRP-S
-
Foil Bending Profile | single contact
Teflon coated foil bending profiles with a single contact available from 500 upto 1500 mm. length. Ideal for bending very thin plastic sheets and foamed PVC perfectly. Populair accessory for all our plastic sheet bending machines.
Suitable for:- ABM-D
- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
-
Cooling fixture | VMA
Our adjustable cooling fixtures VMA are available in 4 lengths, 65, 125, 220 and 300 cm. The VMA cooling molds are made of high-quality HPL panels. They have a single adjustable bend angle with protractor and 2 parallel stops.
Suitable for:- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE
-
Working length adjusting set
This working length adjusting set is used to create partially cold or hot zones without covering the heating wire. The temperature can still be adjusted as required. The unique set can be connected to all our heating wire plastic sheet bending machines.
Suitable for:- ABM-D
- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE
-
Weight blocks
They are used for holding plastic sheets flat during heating proces or holding sheets in place during the cooling proces. The heavy metal blocks are painted with a high quality powder-coating. We offer different sizes of weight block sets.
Suitable for:- HR
- HRK
- HRM
- HRP
- HRP-D
- HRP-S
- HRT
- HRT-D
- X-WIRE
-
Magnetic timer
Magnetic timer with digital display and alarm easy to stick to your machine. Ideal for setting heating times for machines without a time controlled top frame. Alarm functions as timer and stopwatch for your repeating bending cycle.
Suitable for:- HR
- HRM
- HRT
- HRT-D
- X-WIRE
Other suggested products
-
HRT
Modular constructed acrylic sheet bending machine with 650 to 3.000 mm working lengths. Equipped with 1 upto 4 heating line and comes standard with parallel back stop. Many accessories for special bending projects and mobile underframes available.
Machine type:- Manual bending machine
-
HRK
Very productive modular constructed plastic bending machines with double side heating and electronic timer. Available in 650 and 1250 mm working length. Can be upgraded upto 4 heating lines top and 4 heating lines bottom.
Machine type:- Manual bending machine
-
HRP-S
Heavy constructed plastic bending machines with double side heating for all kinds of thermoplastics. Available in 2200 and 3000 mm. working length. Has upto 2 heating lines top and 4 bottom and 4 heating lines can be used simultaneously.
Machine type:- Manual bending machine
-
HRP VERTICAL
Heavy constructed plastic bending machines with double side heating. Heating length is 125 cm. and distance between the heating lines is maximum 2200 or 3000 mm. Can be upgraded upto 4 heating lines top and 4 bottom with 4 temperature controllers.
Machine type:- Manual bending machine
-
HRT plus 3
Shannon plastic sheet bender with manual upper frames to function as pressure bars. The upper frame consists out of 3 individual parts with adjustable pressure bars. The acrylic bending machine has upto 4 profiles with height adjustable heating wires.
Machine type:- Manual bending machine